Difference between revisions of "Litespeed"

From Atomicorp Wiki
Jump to: navigation, search
m (Does ASL work with LiteSpeed?)
m (Do the modsecurity rules work with Litespeed)
 
(30 intermediate revisions by 2 users not shown)
Line 1: Line 1:
 
== Does ASL work with LiteSpeed?  ==
 
== Does ASL work with LiteSpeed?  ==
  
Litespeed does not apparently work with secure kernels, such as the ASL kernel.  If you use Litespeed, you may not be able to use a secure kernel such as the ASL kernel.  If you do use the ASL kernel, with Litespeed, and Litespeed does not work please know that this is not something we can resolve.  This is a due to a vulnerability in Litespeed that the kernel is protected the system from. We highly recommend you report this vulnerability to Litespeed, and that you open a support case with Litespeed.   
+
Yes, ASL is supported with LiteSpeed.   
  
Due to the closed source nature of Litespeed, this is not something we can fix in Litespeed and not something we can change in the kernel (the vulnerability in Litespeed attempts to open a hole in the kernel, which would make the system vulnerable to a root level compromise.  This is not something we can or will all to occur with the ASL kernel).  As this is a vulnerability in Litespeed, the correct solution is for Litespeed to fix this vulnerability.
+
== Do the modsecurity rules work with Litespeed ==
  
Litespeed, like all HTTP based servers, may be protected through the ASL T-WAF module.  Litespeed will show connections from the local system, by default, when using the T-WAF as all connections will in fact be coming from the server itself.  Litespeed will need to be configured to use the X-Forwarded-From header for the upstream IP address of the client.  Please contact Litespeed for official instructions about how to configure Litespeed to do this.
+
'''Yes, when used with the [https://www.atomicorp.com/wiki/index.php/ASL_WAF#WAF_Tab ASL Transparent WAF (T-WAF)] in front of Litespeed all rules are supported.'''
  
Courtesy instructions for setting up Litespeed to do this are provided on the [[ASL WAF]] page.
+
When using the rules without the ASL Transparent WAF, where the rules are only loaded directly into Litespeed, please see the official Litespeed page for what modsecurity features Litespeed supports:
  
== How to install the T-WAF ==
+
http://www.litespeedtech.com/support/wiki/doku.php?id=litespeed_wiki:mod_security_compatibility
  
As root, run this command:
+
Currently, if you do not use the T-WAF, this means Litespeed does not support the following features:
  
yum install asl-waf-module
+
# Output analysis: This means Litespeed can not inspect the output from the web server.  This means rules like malware detection, malicious shell prevention, brute force protection, data loss protection and other rules that analyze the output from the web server are not supported by Litespeed, unless you use [https://www.atomicorp.com/wiki/index.php/ASL_WAF#WAF_Tab the ASL Transparent WAF (T-WAF) in front of Litespeed].
 +
# XML inspection:  Litespeed has chosen to not support XML inspection, this means XML based attacks are unfortunately not protected on that platform, unless you use [https://www.atomicorp.com/wiki/index.php/ASL_WAF#WAF_Tab the ASL Transparent WAF (T-WAF) in front of Litespeed].
 +
# Multi-part Upload protection:  Litspeed does not support scanning attached files content in multi-part upload.  If you use [https://www.atomicorp.com/wiki/index.php/ASL_WAF#WAF_Tab the ASL Transparent WAF (T-WAF) in front of Litespeed] you will be able to scan attached files in a multi-part upload.
 +
# lua: This is a language that lets us construct advanced rules.  Currently they are used for advanced anti-spam protection and advanced SQLi and XSS injection protection.  Therefore, these types of rules are not supported by Litespeed, unless you use [https://www.atomicorp.com/wiki/index.php/ASL_WAF#WAF_Tab the ASL Transparent WAF (T-WAF) in front of Litespeed].
  
== How to configure the T-WAF for litespeed  ==
+
== How to configure a local WAF for litespeed  ==
 +
 
 +
=== ASL V ===
 +
 
 +
Step 1) Log into ASL.
 +
 
 +
Step 2) Click on the "ASL" tab. 
 +
 
 +
Step 3) Click on the "WAF Configuration" menu option.
 +
 
 +
Step 4) Click the "Add" button.
 +
 
 +
Step 5) In the "Add New TWAF Setting" window from the "Add protection for ..." drop down, select "Local Web Server"
 +
 
 +
Step 6) Select the port that litespeed runs on. Normally this is port 80.
 +
 
 +
Step 7) Check the SSL box
 +
 
 +
Enter the file system path to your SSL certificate, and SSL key in the "Path to SSL Certificate" and "Path to SSL Key file" boxes.
 +
 
 +
Step 8) Click Save
 +
 
 +
=== ASL 4 ===
  
 
Step 1) Log into ASL.  
 
Step 1) Log into ASL.  
Line 36: Line 61:
  
 
Note:  Litespeed does not support the WAF in embedded mode.
 
Note:  Litespeed does not support the WAF in embedded mode.
 +
 +
= Questions =
 +
 +
== I've loaded the rules into Litespeed, does that mean they work with Litespeed? ==
 +
 +
Yes, however please see the LSWS official page for what modsecurity features Litespeed supports and does not support.
 +
 +
https://www.litespeedtech.com/support/wiki/doku.php/litespeed_wiki:config:mod_security-compatibility

Latest revision as of 17:29, 26 July 2022

Contents

[edit] Does ASL work with LiteSpeed?

Yes, ASL is supported with LiteSpeed.

[edit] Do the modsecurity rules work with Litespeed

Yes, when used with the ASL Transparent WAF (T-WAF) in front of Litespeed all rules are supported.

When using the rules without the ASL Transparent WAF, where the rules are only loaded directly into Litespeed, please see the official Litespeed page for what modsecurity features Litespeed supports:

http://www.litespeedtech.com/support/wiki/doku.php?id=litespeed_wiki:mod_security_compatibility

Currently, if you do not use the T-WAF, this means Litespeed does not support the following features:

  1. Output analysis: This means Litespeed can not inspect the output from the web server. This means rules like malware detection, malicious shell prevention, brute force protection, data loss protection and other rules that analyze the output from the web server are not supported by Litespeed, unless you use the ASL Transparent WAF (T-WAF) in front of Litespeed.
  2. XML inspection: Litespeed has chosen to not support XML inspection, this means XML based attacks are unfortunately not protected on that platform, unless you use the ASL Transparent WAF (T-WAF) in front of Litespeed.
  3. Multi-part Upload protection: Litspeed does not support scanning attached files content in multi-part upload. If you use the ASL Transparent WAF (T-WAF) in front of Litespeed you will be able to scan attached files in a multi-part upload.
  4. lua: This is a language that lets us construct advanced rules. Currently they are used for advanced anti-spam protection and advanced SQLi and XSS injection protection. Therefore, these types of rules are not supported by Litespeed, unless you use the ASL Transparent WAF (T-WAF) in front of Litespeed.

[edit] How to configure a local WAF for litespeed

[edit] ASL V

Step 1) Log into ASL.

Step 2) Click on the "ASL" tab.

Step 3) Click on the "WAF Configuration" menu option.

Step 4) Click the "Add" button.

Step 5) In the "Add New TWAF Setting" window from the "Add protection for ..." drop down, select "Local Web Server"

Step 6) Select the port that litespeed runs on. Normally this is port 80.

Step 7) Check the SSL box

Enter the file system path to your SSL certificate, and SSL key in the "Path to SSL Certificate" and "Path to SSL Key file" boxes.

Step 8) Click Save

[edit] ASL 4

Step 1) Log into ASL.

Step 2) Click on the "Configuration" tab.

Step 3) Click on the "WAF" tab and select "WAF configuration".

Step 4) Click the "Add" button.

Step 5) Select "Local Web Server" from the "Add protection for" drop down.

Step 6) Select the port that litespeed runs on. Normally this is port 80.

Step 7) Check the SSL box

Enter the file system path to your SSL certificate, and SSL key in the "Path to SSL Certificate" and "Path to SSL Key file" boxes.

Step 8) Click Save

Note: Litespeed does not support the WAF in embedded mode.

[edit] Questions

[edit] I've loaded the rules into Litespeed, does that mean they work with Litespeed?

Yes, however please see the LSWS official page for what modsecurity features Litespeed supports and does not support.

https://www.litespeedtech.com/support/wiki/doku.php/litespeed_wiki:config:mod_security-compatibility

Personal tools