Difference between revisions of "Litespeed"

From Atomicorp Wiki
Jump to: navigation, search
(Does ASL work with LiteSpeed?)
m (I've loaded the rules into Litespeed, does that mean they work with Litespeed?)
(40 intermediate revisions by 2 users not shown)
Line 1: Line 1:
 
== Does ASL work with LiteSpeed?  ==
 
== Does ASL work with LiteSpeed?  ==
  
Partially, but the Web Application Firewall does not. This is because LiteSpeed has a proprietary implementation of mod_security, the Web Application Firewall (WAF) module we use in Apache. '''Litespeeds implementation of mod_security is is neither a drop in replacement for the real mod_security module, nor does it support the full rule set or rule languageBecause of this, it is not compatible with modern mod_security rules and can not protect against modern web attacks.'''
+
Yes, ASL is supported with LiteSpeed.   
  
To currently support LiteSpeed we would have to significantly weaken the rules, and, ironically, they would also be much much slower using LiteSpeeds mod_security implementation.  This is actually not because LiteSpeed is slower than Apache (Litespeed claims the opposite), but because the LiteSpeed WAF module does not support the new rule language in mod_security that allows us to design in massive performance enhancements to the rules.
+
== Do the modsecurity rules work with Litespeed ==
  
If you want to use LiteSpeed, you will either have to forgo web application protection (definitely not recommended), or you will need to install a WAF in front of LiteSpeed to get web application protection, either via a standalone WAF or an apache proxy with our WAF module included.
+
'''When used with the [https://www.atomicorp.com/wiki/index.php/ASL_WAF#WAF_Tab ASL Transparent WAF (T-WAF)] in front of Litespeed all rules are supported.'''
  
We do encourage you to encourage LiteSpeed to support the full mod_security rule language, and also to document their implementation (we have had no luck finding any documentation on their implementation) - as well as to reply to our emails regarding their productWe would really like to be able to support it!
+
When using the rules directly with Litespeed, please see the official Litespeed page for what rule language features Litespeed supports:
 +
 
 +
http://www.litespeedtech.com/support/wiki/doku.php?id=litespeed_wiki:mod_security_compatibility
 +
 
 +
Currently, if you do not use the T-WAF, this means Litespeed does not support the following features:
 +
 
 +
# Output analysis: This means Litespeed can not inspect the output from the web server.  This means rules like malware detection, malicious shell prevention, brute force protection, data loss protection and other rules that analyze the output from the web server are not supported by Litespeed, unless you use [https://www.atomicorp.com/wiki/index.php/ASL_WAF#WAF_Tab the ASL Transparent WAF (T-WAF) in front of Litespeed].
 +
# XML inspection:  Litespeed has chosen to not support XML inspection, this means XML based attacks are unfortunately not protected on that platform, unless you use [https://www.atomicorp.com/wiki/index.php/ASL_WAF#WAF_Tab the ASL Transparent WAF (T-WAF) in front of Litespeed].
 +
# Multi-part Upload protection:  Litspeed does not support scanning attached files content in multi-part upload.  If you use [https://www.atomicorp.com/wiki/index.php/ASL_WAF#WAF_Tab the ASL Transparent WAF (T-WAF) in front of Litespeed] you will be able to scan attached files in a multi-part upload.
 +
# lua: This is a language that lets us construct advanced rules.  Currently they are used for advanced anti-spam protection and advanced SQLi and XSS injection protection.  Therefore, these types of rules are not supported by Litespeed, unless you use [https://www.atomicorp.com/wiki/index.php/ASL_WAF#WAF_Tab the ASL Transparent WAF (T-WAF) in front of Litespeed].
 +
 
 +
== How to configure a local WAF for litespeed  ==
 +
 
 +
=== ASL V ===
 +
 
 +
Step 1) Log into ASL.
 +
 
 +
Step 2) Click on the "ASL" tab. 
 +
 
 +
Step 3) Click on the "WAF Configuration" menu option.
 +
 
 +
Step 4) Click the "Add" button.
 +
 
 +
Step 5) In the "Add New TWAF Setting" window from the "Add protection for ..." drop down, select "Local Web Server"
 +
 
 +
Step 6) Select the port that litespeed runs on.  Normally this is port 80.
 +
 
 +
Step 7) Check the SSL box
 +
 
 +
Enter the file system path to your SSL certificate, and SSL key in the "Path to SSL Certificate" and "Path to SSL Key file" boxes.
 +
 
 +
Step 8) Click Save
 +
 
 +
=== ASL 4 ===
 +
 
 +
Step 1) Log into ASL.
 +
 
 +
Step 2) Click on the "Configuration" tab.   
 +
 
 +
Step 3) Click on the "WAF" tab and select "WAF configuration".
 +
 
 +
Step 4) Click the "Add" button.
 +
 
 +
Step 5) Select "Local Web Server" from the "Add protection for" drop down.
 +
 
 +
Step 6) Select the port that litespeed runs on.  Normally this is port 80.
 +
 
 +
Step 7) Check the SSL box
 +
 
 +
Enter the file system path to your SSL certificate, and SSL key in the "Path to SSL Certificate" and "Path to SSL Key file" boxes.
 +
 
 +
Step 8) Click Save
 +
 
 +
Note:  Litespeed does not support the WAF in embedded mode.
 +
 
 +
= Questions =
 +
 
 +
== I've loaded the rules into Litespeed, does that mean they work with Litespeed? ==
 +
 
 +
Yes, but please see the LSWS official page for what language features Litespeed supports and does not support.
 +
 
 +
https://www.litespeedtech.com/support/wiki/doku.php/litespeed_wiki:config:mod_security-compatibility

Revision as of 13:47, 19 June 2017

Contents

Does ASL work with LiteSpeed?

Yes, ASL is supported with LiteSpeed.

Do the modsecurity rules work with Litespeed

When used with the ASL Transparent WAF (T-WAF) in front of Litespeed all rules are supported.

When using the rules directly with Litespeed, please see the official Litespeed page for what rule language features Litespeed supports:

http://www.litespeedtech.com/support/wiki/doku.php?id=litespeed_wiki:mod_security_compatibility

Currently, if you do not use the T-WAF, this means Litespeed does not support the following features:

  1. Output analysis: This means Litespeed can not inspect the output from the web server. This means rules like malware detection, malicious shell prevention, brute force protection, data loss protection and other rules that analyze the output from the web server are not supported by Litespeed, unless you use the ASL Transparent WAF (T-WAF) in front of Litespeed.
  2. XML inspection: Litespeed has chosen to not support XML inspection, this means XML based attacks are unfortunately not protected on that platform, unless you use the ASL Transparent WAF (T-WAF) in front of Litespeed.
  3. Multi-part Upload protection: Litspeed does not support scanning attached files content in multi-part upload. If you use the ASL Transparent WAF (T-WAF) in front of Litespeed you will be able to scan attached files in a multi-part upload.
  4. lua: This is a language that lets us construct advanced rules. Currently they are used for advanced anti-spam protection and advanced SQLi and XSS injection protection. Therefore, these types of rules are not supported by Litespeed, unless you use the ASL Transparent WAF (T-WAF) in front of Litespeed.

How to configure a local WAF for litespeed

ASL V

Step 1) Log into ASL.

Step 2) Click on the "ASL" tab.

Step 3) Click on the "WAF Configuration" menu option.

Step 4) Click the "Add" button.

Step 5) In the "Add New TWAF Setting" window from the "Add protection for ..." drop down, select "Local Web Server"

Step 6) Select the port that litespeed runs on. Normally this is port 80.

Step 7) Check the SSL box

Enter the file system path to your SSL certificate, and SSL key in the "Path to SSL Certificate" and "Path to SSL Key file" boxes.

Step 8) Click Save

ASL 4

Step 1) Log into ASL.

Step 2) Click on the "Configuration" tab.

Step 3) Click on the "WAF" tab and select "WAF configuration".

Step 4) Click the "Add" button.

Step 5) Select "Local Web Server" from the "Add protection for" drop down.

Step 6) Select the port that litespeed runs on. Normally this is port 80.

Step 7) Check the SSL box

Enter the file system path to your SSL certificate, and SSL key in the "Path to SSL Certificate" and "Path to SSL Key file" boxes.

Step 8) Click Save

Note: Litespeed does not support the WAF in embedded mode.

Questions

I've loaded the rules into Litespeed, does that mean they work with Litespeed?

Yes, but please see the LSWS official page for what language features Litespeed supports and does not support.

https://www.litespeedtech.com/support/wiki/doku.php/litespeed_wiki:config:mod_security-compatibility

Personal tools