Latest revision as of 08:13, 23 October 2020 (edit) Scott (Talk | contribs) (Created page with "{{Infobox |header1 = Rule 1 |label2 = Status |data2 = Active |label3 = Alert Message |data3 = OpenSCAP event }} = Description = OpenSCAP has reported the system is less t...")

---

Latest revision as of 08:13, 23 October 2020

Rule 1
Status	Active
Alert Message	OpenSCAP event

Contents 1 Description 1.1 What you should do 2 Troubleshooting 2.1 False Positives 2.2 Tuning Guidance 3 Additional Information 3.1 Support 3.2 Similar Rules 3.3 Knowledge Base Articles 3.4 Outside References 3.5 Notes

[edit] Description

OpenSCAP has reported the system is less than 30% compliant with the configured compliance profile.

[edit] What you should do

This means some of the security controls recommended by the configured profile are not implemented or otherwise enabled. Investigate the system to identify which controls are not in place and if they can be enabled.

For some regulatory frameworks, a failure of some controls may require the system to be shut down or taken out of service until the controls are working correctly.

[edit] Troubleshooting

[edit] False Positives

There are no false positives with this rule.

[edit] Tuning Guidance

There is no guidance for tuning this rule, this is a generic error and the rule should not be disabled.

[edit] Additional Information

[edit] Support

If you are unsure about how to respond to this alert, please contact Atomicorp support. We're here to help you!

[edit] Similar Rules

None.

[edit] Knowledge Base Articles

None.

[edit] Outside References

None.

[edit] Notes