Revision as of 08:49, 22 October 2020 (edit) Scott (Talk | contribs) (Created page with "{{Infobox |header1 = Rule 1 |label2 = Status |data2 = Active |label3 = Alert Message |data3 = Windows audit failure event }} = Description = Windows has failed to properl...")		Latest revision as of 08:51, 22 October 2020 (edit) (undo) Scott (Talk | contribs)
Line 4:		Line 4:
	|data2 = Active		|data2 = Active
	|label3 = Alert Message		|label3 = Alert Message
−	|data3 =  Windows audit failure event	+	|data3 =  Windows audit event
	}}		}}
	= Description =		= Description =
−	Windows has failed to properly audit an event.	+	This indicates that the windows audit log was cleared.
	== What you should do ==		== What you should do ==
−	This means something is wrong with the auditing system on the effected Windows system. This could be caused by a lack of disk space, a misconfiguration of the auditing services or a system level problem on the host that is prevening the auditing system from working correctly.  The effected system should be checked to ensure it has adequate drive space, is configured correctly and is otherwise operating correctly.  The system should also be checked to ensure it has the latest updates from Microsoft installed.	+	No recommendations.
−		+
−	For some regulatory frameworks, a failure of the auditing system to work correctly may require the system to be shut down or taken out of service until the auditing system is working correctly.	+

---

Latest revision as of 08:51, 22 October 2020

Rule 1
Status	Active
Alert Message	Windows audit event

Contents 1 Description 1.1 What you should do 2 Troubleshooting 2.1 False Positives 2.2 Tuning Guidance 3 Additional Information 3.1 Support 3.2 Similar Rules 3.3 Knowledge Base Articles 3.4 Outside References 3.5 Notes

[edit] Description

This indicates that the windows audit log was cleared.

[edit] What you should do

No recommendations.

[edit] Troubleshooting

[edit] False Positives

There are no false positives with this rule.

[edit] Tuning Guidance

There is no guidance for tuning this rule, this is a generic Windows error and the rule should not be disabled.

[edit] Additional Information

[edit] Support

If you are unsure about how to respond to this alert, please contact Atomicorp support. We're here to help you!

[edit] Similar Rules

None.

[edit] Knowledge Base Articles

None.

[edit] Outside References

None.

[edit] Notes