Difference between revisions of "RAID"
From Atomicorp Wiki
| Line 8: | Line 8: | ||
2) replace /dev/hda | 2) replace /dev/hda | ||
| − | |||
3) partition /dev/hda to create RAID containers like hdc. They must be the same size as the partitions on the other disk, and of type fd (Linux raid autodetect) | 3) partition /dev/hda to create RAID containers like hdc. They must be the same size as the partitions on the other disk, and of type fd (Linux raid autodetect) | ||
| − | |||
4) mdadm --add /dev/md0 /dev/hda1 | 4) mdadm --add /dev/md0 /dev/hda1 | ||
| − | |||
5) To monitor progress: cat /proc/mdstat | 5) To monitor progress: cat /proc/mdstat | ||
6) Optional: regrub the disk if this is /boot | 6) Optional: regrub the disk if this is /boot | ||
Revision as of 09:51, 17 April 2007
Rebuilding a failed array.
1) the old state
/dev/md0 is /dev/hda1 and /dev/hdc1
has /dev/hda failed
2) replace /dev/hda
3) partition /dev/hda to create RAID containers like hdc. They must be the same size as the partitions on the other disk, and of type fd (Linux raid autodetect)
4) mdadm --add /dev/md0 /dev/hda1
5) To monitor progress: cat /proc/mdstat
6) Optional: regrub the disk if this is /boot
