Difference between revisions of "ASL firewall"
m (→How to allow connections to a TCP port) |
m (→Fast Mode Method) |
||
Line 283: | Line 283: | ||
==== Fast Mode Method ==== | ==== Fast Mode Method ==== | ||
− | To add TCP ports to | + | To add TCP ports to the allowed outbound list, please see the [https://www.atomicorp.com/wiki-admin//index.php/ASL_firewall#FW_OUTPUT_TCP_SERVICES FW_OUTPUT_TCP_SERVICES option]. |
+ | To add UDP ports to be allowed outbound list, please see the [https://www.atomicorp.com/wiki-admin//index.php/ASL_firewall#FW_OUTPUT_TCP_SERVICES FW_OUTPUT_UDP_SERVICES option]. | ||
==== Advanced Firewall Management Method ==== | ==== Advanced Firewall Management Method ==== |
Revision as of 16:28, 7 September 2012
Introduction
ASL has two different ways you can configure the firewall on your system:
1) Fast/Easy Mode
This configuration system should be the one most new users are familiar with. This system lets you quickly define a list of ports to allow or deny in a list. For most uses the Fast/Easy mode is what you will want to use.
2) Advanced Firewall Rule Manager
This is a full featured netfilter GUI. This will allow you to define arbitrary chains, actions, modules and other advanced iptables features. This is recommended for advanced users.
Fast/Easy Mode
To access the Fast/Easy mode, just click on Configuration Tab in the ASL GUI, then select the "ASL Configuration" menu option. From there scroll down to the Firewall Configuration settings. These are the settings you can configure and what they do:
FW_INBOUND_TCP_SERVICES
List of allowed inbound TCP services, comma delimited. Just provide a list of the ports you want to allow in. Anything not on the list will be denied by default.
Example: 22,25,80
FW_INBOUND_UDP_SERVICES
List of allowed inbound UDP services, comma delimited. Just provide a list of the ports you want to allow in. Anything not on the list will be denied by default.
Example: 53,123
FW_OUTPUT_TCP_SERVICES
List of allowed outbound TCP connections, in a comma delimited format. Just provide a list of the ports you want to allow out. Anything not on the list will be denied by default. You do not need to add any rules for services that are listening. For example, if you allow port 80 in, you do not need to allow port 80 out. ASL uses a stateful firewall and will allow listening services to communicate out. This list is for client initiated requests outbound from the server. For example, if a user wanted to ssh from the server to another server, you would need to allow port 22 out. You do not need to allow port 22 out to allow connections to the ssh service running on the server.
Example: 25,80
FW_OUTPUT_UDP_SERVICES
List of allowed outbound UDP connections, in a comma delimited format. Just provide a list of the ports you want to allow out. Anything not on the list will be denied by default. You do not need to add any rules for services that are listening. For example, if you allow port 53 in, you do not need to allow port 53 out. ASL uses a stateful firewall and will allow listening services to communicate out. This list is for client initiated requests outbound from the server. However, if you had a service that needed to open connections outbound on its own, for example a DNS server would open connections on its own to look up domain names, you would need to allow port 53 out. You do not need to allow port 53 out to allow connections to the dns service running on the server, only if the DNS server needed to make its own independent connections outbound.
Example: 53,123
Engine settings
The Fast/Easy Mode also allows you to configure the core functionality of the netfilter engine. The following is a list of options you can set and what they do.
FW_OUTPUT_MTA
Outbound MTA policy, enabling this rule class will only allow outbound tcp/25 connections for users in the access list /etc/asl/firewall/mta-output-acl. This allows you to restrict outbound SMTP connections to specific users, such as the Mail Servers (MTA) user, which would require your users to use your local mail server for outbound connections. This allows you to filter all outbound email for spam, and prevents your users from setting up spam bots to send email out directly.
Simply put a list of the user names you wish to allow outbound SMTP connections from in the /etc/asl/firewall/mta-output-acl file. The format is one username per line.
FW_LASSO
Enable/Disable the Spamhaus Lasso blacklist. Enabling this option will block all hosts on the current Spamhaus Lasso blacklist.
FW_DSHIELD
Enable/Disable the DShield blacklist. Enabling this option will block all hosts on the current DShield blacklist.
FW_TOR
Enable/Disable the TOR exit node list. Enabling this option will block all current TOR exit nodes.
FW_ACCEPT_REDIRECTS
This option controls how the system will respond to redirects. The default setting of "no" is recommended and is also the default setting in Linux. You should not enable this setting unless you know what you are doing. Enabling this can make it possible for an attacker to bypass your firewall rules.
FW_ACCEPT_SOURCE_ROUTE
This option controls how the system will respond to a Source Route packet. It is highly recommend you not enable this, and leave the default setting of "no". Source Routed packets can bypass all your firewall rules, are not necessary for proper network functioning and are a relic of IPv4 that should never be used for secure networking.
FW_ICMP_IGNORE_ALL
This option controls how the system will respond to any ICMP broadcast request, such as a ping. It is recommended you not enable this option if you want your system to respond to pings and other ICMP queries.
FW_ICMP_IGNORE_BROADCASTS
This option controls how the system will respond to bogus ICMP broadcast request (so called smurf attacks). It is recommended you enable this option.
FW_IGNORE_ICMP_BOGUS
This option controls how the system will respond to bogus ICMP requests. It is recommended you enable this option.
FW_IPV4_FORWARD
This option enables and disable IPv4 forwarding. If your system is not forwarding traffic to another host, then it is highly recommended you disable forwarding. The default is to disable forwarding.
FW_IPV6_FORWARD
This option enables and disable IPv6 forwarding. If your system is not forwarding traffic to another host, then it is highly recommended you disable forwarding. The default is to disable forwarding.
FW_PROXY_ARP
Enable/Disable proxy arp. It is recommend you not enable this, and leave the default setting of "no". Unless your system is acting as a layer two bridge, you will not need to proxy ARP packets. Enabling this if you are not bridging may result in unexpected networking side effects.
FW_RP_FILTER
Enable/Disable rp_filter. This option controls the Reverse Path Filtering capability in netfilter. This controls whether a response packet is allowed to go out an interface that the request did not originate from. For example, if a system has two interfaces eth0 and eth1, and a packet comes in on eth0. If the system responded, and tried to send the request out eth1 if RP_FILTER was enabled this would be denied. This is to help prevent specific types of routing attacks as well as to restrict egress packets from the system. On systems with complex routing tables, and virtual interfaces this may cause problems as packets will not always exit the same interface they came in on. Therefore, the default is not to enable this. If you do enable this, you should test to make sure your systems configuration will work correctly with this type of restriction.
FW_SYN_COOKIES
Enable/Disable SYN cookies. This option controls the use of SYN cookies. This is a Denial of Service protection feature of netfilter, and we recommend you enable this option.
FW_TCP_ECN
Enable/Disable Excplicit Congestion Notification (ECN). This will allow you to enable/disable ECN.
There are three options:
Yes: Enable ECN
No: Disable ECN
Requested: Only use ECN if the client requests it. (Available in ASL 3.0.26)
For most systems, you should set this to Yes or Requested. We recommend you not disable this unless you know how this will effect your system.
FW_TCP_TIMESTAMPS
Enable/Disable TCP timestamps. This will allow you to enable TCP timestamps which may help with the network performance and quality of some protocols.
For most systems, you should set this to Yes. We recommend you not disable this unless you know how this will effect your system.
FW_TCP_WINDOW_SCALING
Enable/Disable TCP Window Scaling. This will allow you to enable TCP Window scaling which may help with the network performance and quality of some protocols.
For most systems, you should set this to Yes. We recommend you not disable this unless you know how this will effect your system.
Advanced Firewall Rule Manager
The Advanced Rule Manager is designed to let you directly control the netfilter engine in Linux through an advanced GUI system. If you are not familiar with how advanced Linux firewalling works please use the Fast/Easy Mode for simple firewall changes.
Access the firewall rule manager
Step 1: Log into the ASL GUI
Step 2: Click on the Firewall Tab.
Step 3: Click on the firewall rules menu item.
This will open the firewall rules window.
Rule Types
Linux supports three types of firewall rules:
NAT
Network Address Translation Rules: These rules are used to change the source and/or destination of packets.
Mangle
This types of rules are used to modify or "mangle" packets before they are processed
Filter
These types of rules are used to filter or "block" packets. These are the most common rules and are probably the type of rule you want if you want to allow or block traffic to specific port.
Filter subtypes
INPUT
These are rules for traffic going to the server itself. These are the most common subtype, and are what you want if you are looking to allow traffic to a port, or to block traffic to a port.
OUTPUT
There are rule for traffic coming out of the server, and being generated by the server.
FORWARD
This subtype is for all all other traffic that is not INPUT or OUTPUT. Specifically, this would be traffic that is passing through the server if the server were acting as a classic firewall for another system. FORWARD rules have nothing to do with the server itself.
Jump Targets
In Linux these tell the rule to jump to an action. This is a way of telling Linux what to do, such as to allow, deny or do something else if the rule is triggered.
ACCEPT
Accept the traffic. This will allow the traffic.
DROP
Silently drop the packet. The client will get no response from the server.
REJECT
Reject the packet. The client will get a reject at the TCP or UDP layer from the server.
Rule options
Using the firewall manager
Adding a firewall rule
Step 1: Select the type of rule you want to add from the list above
Step 2: Select the subtype of the rule you want to add from the list above
Step 3: From the firewall rule manager, select the subtype. For example, to add a filter -> INPUT rule select "INPUT" under the filter tree branch.
this will pull up any INPUT rules you have on the system. To add a new rule select "Add Rule".
Step 4: Select the subtype by selecting it under "Chain". For example, if you want to add an INPUT rule select Table "filter", this should autoselect "INPUT". If it does not just select INPUT as the "Chain".
Step 5: Select the command, Append or Insert. In the Linux, Append means to add the rule after all other rules. Linux firewalling is linear, that means it processes the rules in order "first come first served". Appending places it last. Insert places the rule first, and with insert you can also set the rule number in case you prefer that the rule run second, third, etc.
Step 6: Select the protocol by clicking on the "n/a" drop down. The drop down before this allows you to add a "negative", for example if you want to add a rule to say "not tcp". If you want this rule to be for TCP, just select tcp in the drop down, and leave the first drop down as "-".
Step 7: Type in the source IP/Network for this rule. If you want to allow any network, just leave this blank.
Step 8: Type in the destination for this rule. If you are creating a rule for the server itself, for example to allow connections to a specific port, just leave this blank.
Step 9: Type in the source port. If you are a creating a rule to allow connections to the server from another server, leave this blank.
Step 10: Type in the Destination port. For example, if you want to allow connections to port 22, type in 22.
Step 11: Set the interface. If you want to set this rule for all interfaces, leave the default of "n/a".
Step 12: Set the "Jump Target". In the link this is sort of like the "action". You will see a number of options described above, such as ACCEPT, REJECT. Please see above for more information about these. In general, if you want to allow a connection, select "ACCEPT".
Step 13: Select Add Rule.
Your new rule is now implemented.
Examples
Using the Fast/Easy mode
How to block all incoming TCP connections except to certain ports
Step 1: Log into the ASL GUI
Step 2: Click the Configuration Tab
Step 3: Select the ASL Configuration menu option.
Step 4: Scroll down to Firewall configuration
Step 5: Enter the list of TCP ports you want to allow into the FW_INBOUND_TCP_SERVICES list.
Example:
21,22,25,80,110,143,443,993,995,8443,30000
Step 6: Click Update
Your new rule is now implemented.
Using the Advanced Firewall Manager
How to block all incoming connections to a TCP port
Step 1: Log into the ASL GUI
Step 2: Click the Firewall Tab
Step 3: Select the Firewall Rules menu option.
Step 4: Click the "Add Rule" button.
Step 5: For table, select filter.
Step 6: For Chain select "INPUT"
Step 7: For command select "Insert"
Step 6: For protocol select tcp in the drop down, and leave the first drop down as "-".
Step 7: Type in the source IP/Network for this rule. If you want to block all sources, just leave this blank.
Step 8: In the Destination port window type in the port number you wish to block. For example, if you want to block connections to port 22, type in 22. Leave the first drop down as "-".
Step 9: Set the "Jump Target" to "DROP" or "REJECT". DROP will silently block the attempt so the client is not sure why it was blocked, REJECT will send ICMP destination denied packets to the client applications network stack telling the stack that the connection was dropped at the network level.
Step 10: Then press the Add Rule button.
Your new rule is now implemented.
How to allow connections to a TCP port
Fast Mode Method
To add TCP ports to the allowed outbound list, please see the FW_OUTPUT_TCP_SERVICES option.
To add UDP ports to be allowed outbound list, please see the FW_OUTPUT_UDP_SERVICES option.
Advanced Firewall Management Method
Step 1: Log into the ASL GUI
Step 2: Click the Firewall Tab
Step 3: Select the Firewall Rules menu option.
Step 4: Click the "Add Rule" button.
Step 5: For table, select filter.
Step 6: For Chain select "INPUT"
Step 7: For command select "Insert"
Step 6: For protocol select tcp in the drop down, and leave the first drop down as "-".
Step 7: Type in the source IP/Network for this rule. If you want to allow any network, just leave this blank.
Step 8: In the Destination port window type in the port number you wish to allow. For example, if you want to allow connections to port 22, type in 22. Leave the first drop down as "-".
Step 9: Set the "Jump Target" to "ACCEPT".
How to allow outbound connections to a TCP port
Note: This is only necessary if you have setup either ASL or your firewall rules to only allow connections outbound to certain ports. By default ASL does not block anything outbound.
Step 1: Log into the ASL GUI
Step 2: Click the Firewall Tab
Step 3: Select the Firewall Rules menu option.
Step 4: Click the "Add Rule" button.
Step 5: For table, select filter.
Step 6: For Chain select "OUTPUT"
Step 7: For command select "Insert"
Step 6: For protocol select tcp in the drop down, and leave the first drop down as "-".
Step 7: Type in the source IP/Network for this rule. If you want to allow any network or destination, just leave this blank.
Step 8: In the Destination port window type in the port number you wish to allow. For example, if you want to allow connections to port 22, type in 22. Leave the first drop down as "-".
Step 9: Set the "Jump Target" to "ACCEPT".
Step 10: Then press the Add Rule button.
Your new rule is now implemented.